Other Products ｜Specpoxy 1000 Astm 881 Compliant Hi-Mod Low Viscosity Epoxy Bonding Adhesive

SpecPoxy 1000 is a low-viscosity structural epoxy bonding adhesive and crack injection resin built for deep penetration
SpecPoxy 1000 is a two-component, 100% solids, solvent-free, moisture-insensitive epoxy suited to bonding concrete, steel, and wood, gravity feed or pressure injection crack repairs, and anchoring bolts, dowels, and reinforcing bars.
Key Features & Benefits

Low viscosity for deep crack penetration
0 g/L VOC content
ASTM C881 compliant for Types I, II, IV, and V, Grade 1, Classes B & C
High modulus, moisture insensitive, high strength

Application Instructions

Ensure surfaces are structurally sound, clean, and free of oil, grease, dirt, laitance, curing compounds, and foreign matter
Achieve a surface profile of CSP 3 or greater via sandblasting or mechanical abrasion
For crack injection, attach ports 6"-24" apart depending on crack width and thickness, sealing the crack surface with SpecPoxy 3000 FS (overlapping about 1-1/2" on both sides) before injecting SpecPoxy 1000
For bonding, apply at 80 sq ft per gallon (about 20 mils); place fresh concrete while still tacky, or reapply if not
Reaches initial cure in 24 hours and final cure in 7 days

Technical Data Summary

Compressive Strength: 11,500 psi at final cure

Cure Time: Initial cure 24 hours, final cure 7 days

Packaging
Available in 1-gallon units (also offered in 3-gallon, 15-gallon, and 15 oz dual cartridges).
Supporting Documents
Safety Data Sheet (SDS)
Technical Data Sheet (TDS)
Brand:SpecChemCategory:AdhesivesSKU:SP1000-1Tags:Cementitious Products and Liquids, Coatings Repair, Construction AdhesiveSize:Gallon, 3 Gallon, 15 Gallon