Weekend Spotlight｜ Other Products ｜Premium Waterborne Impregnating Sealer Formerly Stain-Proof Waterborne

STAIN-PROOF® Premium Waterborne Impregnating Sealer, formerly known as STAIN-PROOF WATERBORNE™, is a premium water-based sealing technology designed to seal a range of stone and masonry surfaces, including granite, travertine, limestone and marble.

Coverage Chart
Premium Waterborne Impregnating Sealer protects against staining from oils and other contaminants and provides long-lasting water repellency. Treated surfaces retain breathability, existing color and finish - surfaces are also easier to clean. For indoor, outdoor, residential and commercial use.
Typical Applications
Premium Waterborne Impregnating Sealer can be used for a wide variety of indoor and outdoor applications in residential and commercial buildings, including building facades, floors, walls, showers, swimming pool surrounds, patios, garages, kitchens and entertaining areas.
Benefits

Short dwell time for quicker application. 

Permanent oil and water repellency for stain protection. Chemically bonds to substrate. 

Superior penetration, breathability, and alkali resistance. 

Treated surfaces are easier to clean. Suitable for indoor, outdoor, residential and commercial use. 

Warranty
*A 10-YEAR PERFORMANCE WARRANTY is offered when product applied by an Accredited Applicator following our written instructions and surface is maintained regularly using our written maintenance system, as outlined in our warranty document. Spills should still be cleaned up immediately to minimize absorption. 
VOC Content
VOC (CALCULATED): < 100g/L 
Pack Size
32 fl OZ/.95L | 180112
1 Gallon/3.79 L | 180133 
How To Use

TEST PRODUCT ON A SMALL, INCONSPICUOUS AREA FIRST. Allow a 24-hour cure time to determine the ease of application and desired results 

DO NOT thin product. 

Apply Premium Waterborne Impregnating Sealer using a lambswool or microfiber applicator, foam roller or a HLVP Hand Pump Style sprayer. 

Remove ALL excess product after 5 minutes or as you see sealer soak into substrate. Failure to remove excess will result in a white haze that is difficult to remove. 

If applying a second coat wait 30 minutes after applying first coat. 

Avoid contact with surrounding areas. Total application rate is approximately one quart per 20 to 150 sq. ft. (one liter per 2 to 15 sqm), depending on surface absorption. See coverage guide on our website. 

Thoroughly remove ALL excess sealer on the surface with clean, dry, white cloths, towels no longer than 5 minutes after application. Do not allow sealer to dry on surface. 

Use water to clean equipment 

PRECAUTIONS: Apply when surface temperature is between 5 - 35°C (40 - 95°F). Avoid moisture contact with the surface for 24 hours after application. 
NOTE: Sealer will NOT prevent surface etching, scuff marks or wear. Spills should be cleaned up immediately to minimize absorption. 

Premium Waterborne Impregnating Sealer Downloads
Brochures and Specsheets
Sealer Application Rates
Indoor and Outdoor Maintenance
Porosity Chart
Stain Proof Line Card
Waterborne Sell Sheet
General Surface Maintenance Guide
STAIN-PROOF has produced a comprehensive, easy-to-read guide to maintaining your sealed (or unsealed) porous surface, including stone surfaces. 
STAIN-PROOF Surface Maintenance Guide is divided into clear sections for easy use - indoor and outdoor surfaces, horizontal and vertical surfaces, heavy duty cleaning, light regular cleaning, stain removal and tackling special problems such as salt efflorescence and grout haze.
See our Surface Maintenance Guide
Safety Data Sheets
Premium Waterborne Impregnating Sealer SDS (USA)
Brand:Dry TreatSKU:180133Tags:inventorytracked, SealersSize:Gallon